2013年4月7日 星期日

IP防護等級說明 IP54 IP55 IP56 IP57


摘譯自英文維基百科,IP_Code

IP 碼就是 Ingress Protection 評比的縮寫,有時候也當作 International Protection Rating
的縮寫。通常會看 IP 兩字母后接一碼或兩碼數字,再加一字母或選擇性加另一字母。
例如:IP45 IP54 IP55 IP56 IP57 IP66 IP67 IP68。

在 International standard IEC 60529 的 IP 碼分類,評比防外部固體物質(包括人體,如
手指)入侵機體的保護程度,也包括防塵、防意外接觸、機體防水、防電擊。

這個標準是為了提供更詳細的資訊給使用者,而非只有模糊不清的防水行銷用語。
但遺憾的是沒有公開的標準提供我們未經授權的使用者參考,因此每個人解讀可能
有所差異。

數字標示符合表格中某一種狀況,X 字母表示沒有針對該種狀況的保護程度評分。
比如電氣插座評分 IP22 可以保護手指無法插入,也不會因垂直或接近垂直滴落的水滴造成損害,或造成危險。IP22 或 2X 是一般室內電器的最低安全標準。



固體物件防護 液體防護
第一位數 說明 第二位數 說明
0 無防護 0 無防護
1 可阻擋大於 50 mm 的物體 1 可阻擋垂直落下的液體
2 可阻擋大於 12.5 mm 的物體 2 可阻擋垂直到 15 度角的噴灑液體
3 可阻擋大於 2.5 mm 的物體 3 可阻擋垂直到 60 度角的噴灑液體
4 可阻擋大於 1 mm 的物體 4 可阻擋所有角度的噴灑液體
5 防塵 (無可構成損壞的堆積) 5 可阻擋低壓水柱
6 無塵 6 可阻擋高壓水柱
    7 可直接放入最深 1 m 的水裡
    8 可直接放入超過 1 m 深的水裡


附加的額外字母

標準定義額外的附加字母分類可以保護免於由人造成的損害

等級 可防範以下身體部位的傷害Protected against access to hazardous parts with
A 手背
B 手指
C 工具
D 電線

可以再繼續附加以下字母提供額外的保護資訊:

等級 意義
H 高電壓裝置
M 防水測試中裝置可移動
S 防水測試中裝置直立
W 天氣情況

防機械碰撞

有一個額外數字表示防止機械碰撞,表示方法是用能量數值焦耳(J)。現在已經由 EN 50102
的 IK 數值取代。
雖然在 IEC 60529 第三版後就沒用到,也不在 EN 版本,舊版的規格通常會列在 IP
後的第三碼數字,表示防撞能力。新產品應該都會改成 IK 評比,然而目前沒有明確的
新舊版數值對照表。

掉落IP等級 撞擊能量 等量的掉落質量與高度
0
1 0.225 J 150 g dropped from 15 cm
2 0.375 J 250 g dropped from 15 cm
3 0.5 J 250 g dropped from 20 cm
5 2 J 500 g dropped from 40 cm
7 6 J 1.5 kg dropped from 40 cm
9 20 J 5.0 kg dropped from 40 cm


IK
number
Impact energy
(joules)
Equivalent impact
00 Unprotected No test
01 0.15 Drop of 200 g object from 7.5 cm height
02 0.2 Drop of 200 g object from 10 cm height
03 0.35 Drop of 200 g object from 17.5 cm height
04 0.5 Drop of 200 g object from 25 cm height
05 0.7 Drop of 200 g object from 35 cm height
06 1 Drop of 500 g object from 20 cm height
07 2 Drop of 500 g object from 40 cm height
08 5 Drop of 1.7 kg object from 29.5 cm height
09 10 Drop of 5 kg object from 20 cm height
10 20 Drop of 5 kg object from 40 cm height

IP69K

German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP69K rating for high-pressure, high-temperature wash-down applications.[5] Such enclosures must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning.
The test specifies a spray nozzle that is fed with 80°C water at 8–10MPa (80–100bar) and a flow rate of 14–16L/min. The nozzle is held 10–5 cm from the tested device at angles of 0°, 40°, 60° and 90° for 30s each. The test device sits on a turntable that rotates once every 12s (5rpm).
The IP69K test specification was initially developed for road vehicles, especially those that need regular intensive cleaning (dump trucks, cement mixers, etc.), but also finds use in other areas (e.g., food industry, car wash centres).

NEMA Rating

IP Code Min. NEMA Enclosure rating to satisfy IP Code
IP20 1
IP54 3
IP65 4, 4X
IP67 6
IP68 6P

The United States National Electrical Manufacturers Association (NEMA) also publishes protection ratings for enclosures similar to the IP rating system published by the International Electrotechnical Commission (IEC). However, it also dictates other product features not addressed by IP codes, such as corrosion resistance,gasket aging, and construction practices. Thus, while it is possible to map IP Codes to NEMA ratings that satisfy or exceed the IP Code criteria, it is not possible to map NEMA ratings to IP codes, as the IP Code does not mandate the additional requirements. The table above indicates the minimum NEMA rating that satisfies a given IP code, but can only be used in that way, not to map IP to NEMA.[6]
North American enclosure rating systems are defined in NEMA 250, UL 50, UL 508, and CSA C22.2 N°. 94.

沒有留言: